เหล็กหล่อgกลีบvalve is a forced-sealing valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface to not leak. When the medium enters the valve from below the disc, the resistance that the operating force needs to overcome is the friction force of the valve stem and packing and the thrust generated by the pressure of the medium. The force to close the valve is greater than the force to open the valve, so เหล็กหล่อThe diameter of the valve stem of the gกลีบvalve should be large, otherwise the valve stem will bend up failure.
2. Parameters of เหล็กหล่อGกลีบValve
ประเภทของวาล์ว
เหล็กหล่อgกลีบvalve
DN
DN10~DN600
PN(MPaï¼ ‰
1.6~16Mpa
ออกแบบช่วงอุณหภูมิ
-15â„ ƒï½ž200â„ ƒ
ประเภทการเชื่อมต่อ:
หน้าแปลน
ประเภทตัวกระตุ้น
ไดรฟ์แบบแมนนวล, นิวเมติก, ไฮดรอลิกหรือแอคชูเอเตอร์ไฟฟ้า
สื่อที่ใช้งานได้
น้ำน้ำมันก๊าซและสารกัดกร่อนต่างๆ
อะไหล่สำรอง
วัสดุ
แผ่นปิดตัวถัง
เหล็กหล่อเหล็กหล่อ
ก้าน
เหล็กหล่อเหล็กหล่อ
การบรรจุ
กราไฟท์ยืดหยุ่น, กราไฟท์ยืดหยุ่นที่ปรับปรุงแล้ว, PTEE
ซีล Shim
กราไฟท์ Flexiblo ที่ได้รับการปรับปรุง, เหล็กกล้าไร้สนิม, PTFE
ปิดผนึกใบหน้า
13Cr,STL, PTFE, ไนลอน, พร้อมวัสดุตัวเครื่อง
3. Advantages of เหล็กหล่อgกลีบvalve
1) The structure of the เหล็กหล่อgกลีบvalve is simpler than that of the gate valve, and it is more convenient to manufacture and maintain.
2) พื้นผิวปิดผนึกof เหล็กหล่อgกลีบvalve is not easy to wear and scratch, and the sealing performance is good. There is no relative sliding between the valve disc and the sealing surface of the valve body when opening and closing, so neither abrasion nor abrasion is serious. The sealing performance is good and the service life is long. .
3) When the เหล็กหล่อgกลีบvalve is opened and closed, the disc stroke is small, so the height of the shut-off valve is smaller than that of the gate valve, but the structure length is longer than that of the gate valve.
4) เหล็กหล่อgกลีบvalve has a large opening and closing moment, which is laborious and takes a long time.
5) The medium channel in the เหล็กหล่อgกลีบvalve is tortuous, the fluid resistance is large, and the power consumption is large.
6) When the nominal pressure of the medium flow direction of the เหล็กหล่อgกลีบvalve PN≤16MPa, the downstream flow is generally adopted, and the medium flows upward from the bottom of the valve flap; when the nominal pressure PN≥20MPa, the reverse flow is generally adopted, and the medium flows downward from the top of the valve flap. In order to increase the seal performance. When in use, the shut-off valve medium can only flow in one direction and cannot change the direction of flow.
7) The valve flap is often eroded when the เหล็กหล่อgกลีบvalve is fully opened.
4. คำถามที่พบบ่อย